CE8850-Ei-F-B0b CE8850-Ei-B-B0b 02351RFJ 02351RFH Gigabit Industrial Ethernet Network Switch

Product Description

 

Product Description

• A series of high port density switches, CloudEngine 8800 brings a combination of both high performance and low latency to cloud-oriented data center networks and high-end campus networks alike. Additionally, the series supports an extensive range of data center features, Software-Defined Networking (SDN) capabilities, and high performance stacking technologies. With 10 GE, 25 GE, 40 GE, 100 GE, 200 GE, and 400 GE ports, as well as flexible plug-in cards, CloudEngine 8800 is well suited for both the core and aggregation layers. The series is also compatible with CloudEngine 16800, 12800, 6800, and 5800 series switches, helping enterprises build networks that are scalable, simplified, open - and secure.
   
  Scalability Flexible, high density access, with aggregation capabilities and up to 32 x 100 GE, 64 x 40 GE, 128 x 25 GE, or 128 x 10 GE ports in a 2U chassis.
  Virtualization Virtual Extensible Local Area Network (VXLAN) turns CloudEngine 8800 into a high-performance hardware gateway on a virtualized overlay network, supporting up to 16 million tenants.
  Intelligence Significantly simplify operations with intelligent Operations and Maintenance (O&M), proactive reporting of Google Remote Procedure Call (gRPC) high-speed data, proactive detection of network-wide paths, and real-time monitoring of network health status.

Detailed Photos

 

Product Parameters

 Technical Specifications   

Installation Type	Cabinet installation
Depth [mm]	600 mm
Wide [mm]	442 mm
Height [mm]	43.6 mm
Weight without packaging	9.1 kg (excluding optical modules, power modules, and fan modules)
Weight with packaging	13.4 kg (29.54 lb)
Typical power consumption [W]	- 32 x 200G + 8 x 400G: 590 W (50% throughput, copper cables on all ports, normal temperature, dual power modules) - 32 x 100G + 8 x 400G: 560 W (50% throughput, copper cables on all ports, normal temperature, dual power modules), 693 W (50% throughput, short-distance optical modules on all ports, normal temperature, dual power modules)
Static power consumption [W]	455 W
Maximum power consumption [W]	- 32 x 200G + 8 x 400G: 1152 W (100% traffic load, 6.5 W 200G optical modules on all downlink ports, 12 W 400G optical modules on all uplink ports, high temperature of 40°C, dual power modules) - 32 x 100G + 8 x 400G: 973 W (100% traffic load, 5 W 100G optical modules on all downlink ports, 12 W 400G optical modules on all uplink ports, high temperature of 40°C, dual power modules)
Static heat dissipation [BTU/h]	1757 BTU/hour
Heat dissipation mode	Air cooling
Typical heat dissipation [BTU/h]	- 32 x 200G + 8 x 400G: 2013 BTU/hour (50% throughput, copper cables on all ports, normal temperature, dual power modules) - 32 x 100G + 8 x 400G: 1912 BTU/hour (50% throughput, copper cables on all ports, normal temperature, dual power modules); 2363 BTU/hour (50% throughput, short-distance optical modules on all ports, normal temperature, dual power modules)
Maximum heat dissipation [BTU/h]	- 32 x 200G + 8 x 400G: 3927 BTU/hour (100% traffic load, all downlink ports with 6.5 W 200G optical modules, all uplink ports with 12 W 400G optical modules, 40°C, dual power modules) - 32 x 100G + 8 x 400G: 3323 BTU/hour (100% traffic load, all downlink ports with 5 W 100G optical modules, all uplink ports with 12 W 400G optical modules, 40°C, dual power modules)
Power supply mode	AC,DC,HVDC
Rated input voltage [V]	- Rated input voltage range of 1200 W AC&240 V DC power modules: AC: 100 V AC to 240 V AC, 50/60 Hz; DC: 240 V DC - 1200 W DC power module: -48C DC: -48 V DC to -60 V DC; +48 V DC: +48 V DC
Input voltage range [V]	- 1200 W AC&240 V DC power module: AC: 90 V AC to 290 V AC, 45 Hz to 65 Hz; DC: 190 V DC to 290 V DC - 1200 W DC power module: -48 V DC: -38.4 V DC to -72 V DC; +48 V DC: +38.4 V DC to +60 V DC
Maximum input current [A]	1200 W AC&240 V DC power modules: - 10 A (100 V AC to 130 V AC) - 8 A (200 V AC to 240 V AC) - 8 A (240 V DC) 1200 W DC power module: 38 A
Rated output power [W]	- 1200 W AC&240 V DC power module: 1200 W - 1200 W DC power module: 1200 W
Memory	DRAM: 8 GB
NOR Flash	64 MB
NAND Flash	4 GB
USB	It can be used for log backup and USB-based deployment. This function is reserved.
Console port	RJ45
Downlink Service interface	32*100GE QSFP28/32*200GE QSFP56 1. 100GE ports can be used as 40GE and 50GE (2 x 25GE) ports and cannot be split into 2 x 50GE ports. 2. A 100GE port can be split into 4 x 25GE, 4 x 10GE, or 2 x 50GE (2 x 25GE) ports. Two adjacent ports will be split at the same time. 3. 200GE ports can be used as 40GE and 100GE ports and can be split into 2 x 100GE (2 x 50GE for each 100GE port) ports. Note: 1. Supported optical modules: (1) In the case of port-side air intake, downlink 100GE/200GE ports support 100G-SR4/CWDM4/LR4/4WDM optical modules. (2) In the case of port-side air exhaust, downlink 100GE/200GE ports support 100G-SR4/CWDM4 optical modules. 2. Supported copper cables: When 200G ports are used, contact R&D engineers for interconnection verification before connecting to third-party devices.
Uplink Service interface	8*400GE QSFP-DD 1. 400G ports can be used as 200GE, 100GE, and 40GE ports. 2. In V300R020C10, a 400GE port can be used as a 200GE/100GE/40GE port and can be split into 4 x 100GE (2 x 50GE, rather than 4 x 25GE) ports. Other port split modes, such as 2 x 200G/2 x 100G/2 x 40G/8 x 50G/8 x 25G/8 x 10G/4 x 50G/4 x 25G/4 x 10G, are not supported. In V300R021C10, a 400GE port can be dynamically split into 2 x 200GE ports. Currently, 2 x 200GE AOCs and 2.5 m copper cables can be used. Note: 1. Support for optical modules: (1) In the case of port-side air intake, uplink 400GE ports support 400G-SR8/DR4/FR4. When the ambient temperature ranges from 0°C to 35°C, 400G-LR8 is supported. However, the noise of the device exceeds the threshold at room temperature. (2) In the case of port-side air exhaust, uplink 400GE ports support 400G-SR8. However, the noise of the device exceeds the threshold at room temperature. 2. Support for copper cables: V300R021C10 and later versions: 40G/100G/200G/400G copper cables are supported. A 400GE port can be dynamically split into 2 x 200GE ports. 2.5 m copper cables can be used. When 200G and 400G ports are used, contact R&D engineers for interconnection verification before connecting to third-party devices. V300R020C10 and V300R021C00: 40G/100G/200G/400G copper cables are supported. After uplink ports are split, copper cables are not supported. When 200G and 400G ports are used, contact R&D engineers for interconnection verification before connecting to third-party devices.
Service port supporting the stack function	Reserved function. This function is not enabled.
RTC	Supported
Redundant power supply	1+1 backup
Redundant fans	The device supports 5+1 backup of fan modules that work in hot standby mode. If a single fan module fails, the device can work properly in a short period of time. To guarantee long-term operation of the device, you are advised to replace the failed fan module immediately.
Number of power modules	2
Power supply surge protection	AC power supply protection: 6 kV in common mode and 6 kV in differential mode 240 V HVDC power supply protection: 4 kV in common mode and 2 kV in differential mode -48 V DC power supply protection: 4 kV in common mode and 2 kV in differential mode
Types of fans	Pluggable
Number of fans	6
Airflow direction	port-side intake/port-side exhaust airflow
Storage temperature	-40°C to +70°C (-40°F to +158°F)
Long-term operating temperature	0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.) Note: When the altitude is 1800-5000 m (5096-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Long-term operating relative humidity [RH]	5% RH to 95% RH, non-condensing
Storage relative humidity [RH]	5% to 95% RH, non-condensing
Storage altitude	≤ 5000 m (16404 ft.)
Long-term operating altitude	≤ 5000 m (16404 ft.)
MTBF [year]	21.59 years
MTTR [h]	1.5 hours
Noise at normal temperature (27°C, sound pressure)	- Front-to-back airflow: 56.5 dB(A) on average (maximum: 61.7 dB(A)) - Back-to-front airflow: 58.7 dB(A) on average (maximum: 62.9 dB(A))
Noise at high temperature (40°C, sound pressure)	- Front-to-back airflow: 71.8 dB(A) on average (maximum: 78.3 dB(A)) - Back-to-front airflow: 74.5 dB(A) on average (maximum: 78.9 dB(A))
Availability	0.9999920679

Company Profile

  Chongqing Chimu Technology Co., Ltd. was established in 2011, we have been engaged in this industry 11 years.   Relying on 11 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model.  Let the network better connect you and me, connect the world.  In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price. 
  We are devoted to offering Switches,  Routers,  Servers, Storages, LTs,  SDHs,  Network Modules,  Interface Cards,  Security Firewalls, Wireless AP. Our long-term aim is to provide users high-quality, efficient, economic, timely services.  Looking forward to establish long-term and win-win business relations with you.

Our Advantages

A)Stable and Wide Supply Chain System
we have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
B)Competitive Price
We ensure the most competitive price. Warm reminders here, telecommunications equipment configuration is quite different, the price shown on the website is only for reference. After configuration and quantity been confirmed, we will give the final most competitive discounted price.
C) Safe and Easy Payment Solutions
We accept all major credit cards, PayPal and wire transfer.
D)Fast Delivery and Shipping
Fast, professional and reliable delivery.
E)14+ Years Experience
we have been engaged in this industry more than 14 years, we have rich industry experience.

Packaging & Shipping

FAQ

Q: How about your main products?
A: Our product lines include Switches, Routers, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.

Q: What brand of products do you offer?
A: We can supply all the brands you need.

Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,EXW,FCA;
   Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
   Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash etc...

Q: Can we get free samples?
A: Sorry, it is not available, but you can pay for one.

Q. How can we guarantee quality?
A:Always a pre-production sample before mass production;
   Always final Inspection before shipment;

Q: How about your delivery time?
A: Generally, it will take 1 to 10 days after receiving your deposit.  The specific delivery time depends on the items and the quantity of your order.

Q: Do you test all your goods?
A: Yes, We have professional engineer to test all devices before shipping.

Q:How about the MOQ?
A:1 piece