| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Ethernet Switch |
| Transmission Rate: | 10/100/1000Mbps |
| Ports: | ≦8 |
| Switch Capacity: | 14.8g |
| Transport Package: | Cartons |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Wide [mm] | 442.0 mm | ||
| Depth [mm] | 482.8 mm | ||
| Height [mm] | 575 mm | ||
| Chassis height [U] | 13 | ||
| Weight without packaging [kg(lb)] | 39.84 (87.83) | ||
| Maximum power consumption [W] | 2914 W (full configuration, without PoE) | ||
| Maximum heat dissipation [BTU/hour] | 9942.98 | ||
| Heat dissipation mode | Absorbing cold air into the device | ||
| Rated input voltage [V] | - DC input: -48 V DC/-60 V DC/48 V DC - AC input: 110 V AC/220 V AC, 50/60 Hz - High-voltage DC input: 240 V DC Note: V600R021C10 and later versions support DC power input. | ||
| Input voltage range [V] | - DC input: -38.4 V DC to -72 V DC or 38.4 V DC to 57.6 V DC - AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz - High-voltage DC input: 190 V DC to 290 V DC Note: - V600R021C10 and later versions support DC input. - In V600R021C10 and later versions, the 3000 W output capability of AC power modules (2500 W/3000 W AC&240 V DC power modules) can be enabled using a command. | ||
| Number of service board slots | 8 | ||
| Number of MPU slots | 2 | ||
| Number of power slots | 6 | ||
| Redundant MPUs | The control and switching units work in hot standby mode (1:1). | ||
| Redundant power supply | - Dual-power input: The N+0 and N+1 modes are supported. The N+1 mode is recommended. - Single-power input: The N+0, N+1, and N+N modes are supported. The N+1 mode is recommended. | ||
| Redundant fans | Fan modules work in hot standby mode. The system can operate properly for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. | ||
| Automatic fan speed adjustment | Supported | ||
| Noise at normal temperature (acoustic power) [dB(A)] | - ≤67.5 dB(A) @AC 2500 W N+N power supply - ≤ 74.5 dB(A)@AC 2500 W N+1 power supply - ≤ 78.0 dB(A)@AC 2500 W N+0 power supply - ≤ 71.8 dB(A) @DC 2200 W N+1 power supply In N+0 power supply mode, it is recommended that the DC power output load do not exceed 1780 W. Otherwise, the noise may exceed 78 dBA. Note: - In V600R021C10 and later versions, 2200 W DC power modules are supported. - V600R021C10 and later versions support N+N configuration of AC power modules. - In V600R021C10 and later versions, the 3000 W capability of the AC power module (2500 W/3000 W AC&240 V DC power module) can be enabled using a command. When the power consumption of a single power module exceeds 2500 W, the noise may exceed 72 dB(A) in different power module configurations. | ||
| Airflow direction | Front-to-back airflow | ||
| Long-term operating temperature [°C(°F)] | -5°C to 45°C (23°F to 113°F) at an altitude of -60 m to 1800 m (-197 ft. to 5906 ft.) | ||
| Short-term operating temperature [°C(°F)] | -5°C to +55°C (23°F to 131°F) at an altitude of -60 m to 1800 m (-197 ft. to 5906 ft.) Note: When the short-term operating temperature ranges from 45°C to 55°C: - When the PAC3KS54-DF (2500 W/3000 W AC&240 V DC power module) is used for power supply, the short-term operating temperature can reach 55°C only when the system is configured to work in N+1 power supply mode (the output power of a single power module is less than 2100 W). - Only optical modules with a transmission distance less than or equal to 10 km can be used. | ||
| Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) | ||
| Restriction on the operating temperature variation rate | When the altitude is 1800 m to 5000 m (5905.44 ft. to 16404.00 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). | ||
| Long-term operating relative humidity [RH] | 5% to 95%, noncondensing | ||
| Long-term operating altitude [m(ft.)] | -60 m to +5000 m (-197 ft. to +16404 ft.) | ||
| Storage altitude [m(ft.)] | < 5000 m (16404 ft.) | ||
| MTBF [year] | 30.65 | ||
| MTTR [hour] | 2 | ||
| Availability | 0.99999255112 | ||
| Maximum number of 100GE ports | 2 | ||
| Maximum number of 40GE ports | 4 | ||
| Maximum number of 25GE ports | 136 | ||
| Maximum number of 10GE ports | 400 | ||
| Maximum number of GE ports | 400 | ||
| Power supply surge protection | - 2500 W/3000 W AC&240 V DC power module, AC input mode, power port: ±6 kV in common mode and ±6 kV in differential mode; HVDC input mode, power port: ±2 kV in common mode and ±4 kV in differential mode - 2200 W DC power module, DC power port: ±2 kV in common mode, ±6 kV in differential mode Note: V600R021C10 and later versions support 2200 W DC power modules. | ||
| PoE | Supported | ||
| Relationship between PoE and system power modules | Shared, not differentiated | ||
| Maximum PoE output power per slot | 4800 W (2880 W/slot for the current card) | ||
| Maximum number of PoE ports per slot | 48 | ||
| Maximum PoE output power [W] | 90 | ||
| Maximum power output capability (including the system power output and PoE power output) [W] | - Six 2500 W/3000 W AC&240 V DC power modules: 15000 W (220 V AC or 240 V DC input; output power of each power module: 2500 W) - Six 2200 W DC power modules: 13200 W - N 2500 W/3000 W AC&240 V DC power modules and M 2200 W DC power modules: N x 2500 W + M x 2200 W Note: - V600R021C10 and later versions support DC power input. - In V600R021C10 and later versions, the 3000 W output of 2500 W/3000 W AC&240 V DC power modules can be enabled using a command. When the power module works in 3000 W mode, it can be used only at an altitude lower than 2000 m (6562 ft.). In addition, it cannot be used together with other power modules. - When the input voltage of an AC power module is 110 V, the AC power module cannot be used together with other power modules. Otherwise, overcurrent protection may be triggered for the power module. | ||
Chongqing Chimu Technology Co., Ltd. was established in 2011, we have been engaged in this industry 11 years. Relying on 11 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model. Let the network better connect you and me, connect the world. In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price.
We are devoted to offering Switches, Routers, Servers, Storages, LTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP. Our long-term aim is to provide users high-quality, efficient, economic, timely services. Looking forward to establish long-term and win-win business relations with you.
A)Stable and Wide Supply Chain System
we have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
B)Competitive Price
We ensure the most competitive price. Warm reminders here, telecommunications equipment configuration is quite different, the price shown on the website is only for reference. After configuration and quantity been confirmed, we will give the final most competitive discounted price.
C) Safe and Easy Payment Solutions
We accept all major credit cards, PayPal and wire transfer.
D)Fast Delivery and Shipping
Fast, professional and reliable delivery.
E)11 Years Experience
we have been engaged in this industry more than 11 years, we have rich industry experience.
Q: How about your main products?
A: Our product lines include Switches, Routers, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Q: What brand of products do you offer?
A: We can supply all the brands you need.
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,EXW,FCA;
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash etc...
Q: Can we get free samples?
A: Sorry, it is not available, but you can pay for one.
Q. How can we guarantee quality
?
A:Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: How about your delivery time?
A: Generally, it will take 1 to 10 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q: Do you test all your goods?
A: Yes, We have professional engineer to test all devices before shipping.
Q:How about the MOQ?
A:1 piece
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}