| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Enterprise Switch |
| Transmission Rate: | 1000Mbps |
|
Still deciding? Get samples of US$ 3800/piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Other part codes
|
02354VTA (CE6863H-48S6CQ-K switch
(48*25GE SFP28, 6*100GE QSFP28, not including power supply fan))02354VTB (CE6863H-48S6CQ-K switch (48*25GE SFP28, 6*100GE QSFP28, 2* AC power supply, 4* fan box, port side air inlet)) |
|
Installation method
|
Cabinet installation
|
|
Height[mm]
|
43.6mm
|
|
Depth[mm]
|
420.0mm
|
|
Width[mm]
|
442.0mm
|
|
Weight (fully equipped, including packaging materials) [kg]
|
11.05kg
|
|
Weight (including packaging material) [kg]
|
8.95kg
|
|
Weight (fully equipped, excluding packaging materials) [kg]
|
7.8kg (with AC power supply and fan box,
excluding optical modules, if multiple models of modules are supported, the maximum weight will be used) |
|
Weight (excluding packaging material) [kg]
|
5.7kg (excluding optical module, power supply and fan box)
|
|
Maximum power consumption [W]
|
384W
|
|
Typical power consumption [W]
|
226W (100% load, 48-port SFP28 high-speed cable and
6-port QSFP28 high-speed cable, dual power supplies) 261W (100% load, full port short-distance optical module, dual power supply) |
|
Static power
|
167W
|
|
Maximum heat dissipation value [BTU/h]
|
1310BTU/hour
|
|
Typical heat dissipation value [BTU/h]
|
771BTU/hour (100% load,
48-port SFP28 high-speed cable and 6-port QSFP28 high-speed cable, dual power supplies)891BTU/hour (100% load, port full short-distance optical module, dual power supply) |
|
Heat dissipation method
|
Air cooling
|
|
Static heat dissipation value [BTU/h]
|
570BTU/hour
|
|
Power supply system
|
AC, DC, high voltage DC
|
|
Rated input voltage [V]
|
AC rated input voltage range:
100V AC~240V AC; 50/60Hz-48V DC rated input voltage range: -48V DC~-60V DC600W AC & 240V DC Rated input voltage range: 240V DC1200W high voltage DC rated input voltage range: 240V DC~380V DC |
|
Input voltage range [V]
|
Maximum AC input voltage range: 90V AC~290V AC;
45Hz-65Hz-48V DC maximum input voltage range: -38.4V DC~-72V DC600W AC & 240V DC maximum input voltage range: 190V DC~290V DC1200W high voltage DC maximum input voltage range: 190V DC~400V DC |
|
Maximum input current [A]
|
600W AC & 240V DC power module (PAC600S12 series):•
8A (100V AC~240V DC)• 4A (240V DC)1000W DC power module (PDC1000S12 series): 30A (-48V DC~-60V DC)1200W high voltage DC power module (PHD1K2S12 series): 8A |
|
Rated output power [W]
|
600W (AC&240V HVDC)1000W (-48V DC)1200W (380V HVDC)
|
|
Memory
|
DRAM: 4GB
|
|
NOR Flash specifications
|
64MB
|
|
NAND Flash specifications
|
4GB
|
|
USB interface
|
Can be used for log backup and USB disk deployment.
The function is reserved and not enabled yet. |
|
Console interface type
|
RJ45
|
|
Downstream service port
|
48*25GE SFP28 (Note:
1. The 25GE interface is backward compatible with 10G; supports configuration in GE working mode, interfaces 1-8, 9-12, 13-16, 17-24, 25-28, 29-36, 37- 44 and 45-48 are respectively an interface group. After executing the port mode GE command on any interface in each interface group, all interfaces in the same interface group will be configured as 1Gbit/s. At this time, GE media needs to be inserted so that the interface can UP, the interface inserted into different rate media will be Down; 2. Does not support 10GE LRM/80KM linear optical module; 3. Supports 25GE 1m copper cable and 10GE 1m/3m/5m copper cable, does not support copper cable auto-negotiation, 25GE copper cable Only supports M-LAG Peer-Link port) |
|
Business uplink
|
6*100GE QSFP28 (Note:
1. Each 100G QSFP28 port supports downward compatibility with 40GE; 2. Does not support splitting into 4x25GE and 4x10GE; 3. Supports 100GE and 40GE 1m/3m/5m copper cables, and does not support copper cable automatic Negotiation, 100GE and 40GE copper cables only support M-LAG Peer-Link ports, 100G 3/5m copper cables only support RS FEC, after configuring non-RS FEC mode, the port error-down) |
|
Interfaces that support service port stacking
|
The function is reserved and not enabled yet.
|
|
Real-time clock (RTC)
|
support
|
|
switching capacity
|
3600
|
|
Fan redundancy
|
Supports 3+1 backup,
and the fan module supports hot backup. After a single fan module fails, the system supports normal operation in the short term, but it is recommended to replace the failed fan module immediately. |
|
Power redundancy
|
1+1 backup
|
|
Number of power modules
|
2
|
|
Lightning protection for power port
|
AC: common mode 6kV, differential mode 6kVDC:
common mode 4kV, differential mode 2kVHVDC: common mode 4kV, differential mode 2kV |
|
Fan type
|
Pluggable fan
|
|
Number of fans
|
4
|
|
Air flow direction
|
Front and rear or rear and front air ducts are
determined according to the selected fan module and power module. |
|
Storage temperature [°C]
|
-40°C~+70°C
|
|
Long-term working environment temperature [°C]
|
0°C~40°C (0m~1800m)Note: At an altitude of
1800m to 5000m, the maximum temperature specification decreases by 1°C for every 220m of altitude increase. |
|
Storage relative humidity [RH]
|
5%RH~95%RH, non-condensing
|
|
Long-term working environment relative humidity [RH]
|
5%RH~95%RH, non-condensing
|
|
Store altitude [m]
|
≤5000m
|
|
Long-term working altitude [m]
|
≤5000m
|
|
MTBF [year]
|
47.81 years
|
|
MTTR[h]
|
1.95 hours
|
|
High temperature 40ºC noise (sound pressure)
|
- Front and rear air ducts: <75dB(A)- Rear and front air duct: <74dB(A)
|
|
Noise (sound pressure) at room temperature 27ºC
|
- Front and rear air ducts: <58dB(A)- Rear and front air duct: <57dB(A)
|
|
Availability
|
0.9999962836
|
Chongqing Chimu Technology Co., Ltd. was established in 2011, we have been engaged in this industry 11 years. Relying on 11 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model. Let the network better connect you and me, connect the world. In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price.
We are devoted to offering Switches, Routers, Servers, Storages, LTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP. Our long-term aim is to provide users high-quality, efficient, economic, timely services. Looking forward to establish long-term and win-win business relations with you.
A)Stable and Wide Supply Chain System
we have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
B)Competitive Price
We ensure the most competitive price. Warm reminders here, telecommunications equipment configuration is quite different, the price shown on the website is only for reference. After configuration and quantity been confirmed, we will give the final most competitive discounted price.
C) Safe and Easy Payment Solutions
We accept all major credit cards, PayPal and wire transfer.
D)Fast Delivery and Shipping
Fast, professional and reliable delivery.
E)11 Years Experience
we have been engaged in this industry more than 11 years, we have rich industry experience.
Q: How about your main products?
A: Our product lines include Switches, Routers, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Q: What brand of products do you offer?
A: We can supply all the brands you need.
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,EXW,FCA;
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash etc...
Q: Can we get free samples?
A: Sorry, it is not available, but you can pay for one.
Q. How can we guarantee quality?
A:Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: How about your delivery time?
A: Generally, it will take 1 to 10 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q: Do you test all your goods?
A: Yes, We have professional engineer to test all devices before shipping.
Q:How about the MOQ?
A:1 piece
){kind=link}