| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Ethernet Switch |
| Transmission Rate: | 10/100/1000Mbps |
|
Still deciding? Get samples of US$ 1000/piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Slot Type | Slot ID | Slot Direction | Remarks |
|---|---|---|---|
| LPU slot | Slots 1 to 4 | The top of the board faces upwards | Different types of LPUs can be installed in the same chassis. |
| MPU slot | Slots 5 and 6 | The top of the board faces upwards |
Two MPUs work in active/standby mode for 1:1 hot standby. By default, the MPU with a smaller slot ID is the active MPU, and the MPU with a larger slot ID is the standby MPU. |
| SFU slot | Slots 1 to 9 (Slots 1, 2, and 9 cannot be used.) | The right side of the board faces upwards | SFUs work in load balancing and redundancy mode. SFUs in the same chassis must be the same model. That is, SFUs of different models cannot be installed in the same chassis. |
| PM slot | Slots 1 to 6 | The indicator light end upwards | PMs are plug-and-play. |
| Fan module slot | Slots 1 to 3 | The indicator light end upwards | At the normal temperature range, the system can operate properly for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
|
1. Chassis header |
2. Front ESD jack |
3. PM |
4. Power switch |
5. MPU |
|
6. LPU |
7. Cable management frame |
8. PEM |
9. Fan module |
10. SFU SFUs are located behind fan modules and are invisible after all fan modules are installed. |
|
11. Location of fan modules and SFUs |
12. Two ground points for a two-hole OT terminal There is a yellow grounding label attached. |
13. SFU wrench |
14. Rear ESD jack |
15. Assembly chassis bar code |
|
16. Serial number label |
17. MAC address label |
- |
- |
- |
| Item | Specification |
|---|---|
| Dimensions with packaging (H x W x D) [mm (in.)] | 730 mm x 770 mm x 1150 mm (28.74 in. x 30.31 in. x 45.28 in.) |
| Dimensions without packaging (H x W x D) [mm (in.)] | 438 mm x 483 mm x 985 mm (17.24 in. x 19.02 in. x 38.78 in.) (including mounting brackets) |
| Weight without packaging [kg (lb)] | 94.1 kg (207.49 lb) (including two MPUs and filler panels) |
| Weight without packaging (full configuration) [kg (lb)] | 162 kg (357.21 lb) |
| Weight with packaging [kg (lb)] | 138 kg (304.29 lb) |
| Cabinet installation standards | A812 |
| Chassis height [U] | 9.8 U |
| Redundant MPUs | 1:1 |
| Redundant Switch fabrics | N+M |
| Power supply mode |
|
| Number of power modules | 6 |
| Redundant power supply |
Dual-input power supply is recommended to ensure reliability. |
| Rated input voltage [V] |
|
| Input voltage range [V] |
|
| Maximum input current [A] |
|
| Maximum output power [W] |
|
| Certification |
|
| Redundant fans | Fan modules work in hot standby mode. At the normal temperature range, the system can operate properly for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
| Heat dissipation mode | Heat dissipation using fans |
| Airflow direction | Front-to-back airflow |
| Availability | 0.9999971695 |
| MTBF [year] | 34.93 year |
| MTTR [hour] | 1 hour |
| Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) (When the altitude is between 1800 m and 5000 m (5906 ft. and 16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).) |
| Long-term operating relative humidity [RH] | 5% RH to 85% RH, noncondensing |
| Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) |
| Storage altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Storage relative humidity [RH] | 5% RH to 95% RH, noncondensing |
| Storage temperature [°C (°F)] | -40ºC to +70ºC (-40°F to +158°F) |
| Item | Specification |
|---|---|
| Dimensions with packaging (H x W x D) [mm (in.)] | 730 mm x 770 mm x 1150 mm (28.74 in. x 30.31 in. x 45.28 in.) |
| Dimensions without packaging (H x W x D) [mm (in.)] | 438 mm x 483 mm x 985 mm (17.24 in. x 19.02 in. x 38.78 in.) (including mounting brackets) |
| Weight without packaging [kg (lb)] | 98.1 kg (216.31 lb) (including two MPUs and filler panels) |
| Weight without packaging (full configuration) [kg (lb)] | 163.6 kg (360.74 lb) |
| Weight with packaging [kg (lb)] | 142 kg (313.11 lb) |
| Cabinet installation standards | A812 |
| Chassis height [U] | 9.8 U |
| Redundant MPUs | 1:1 |
| Redundant Switch fabrics | N+M |
| Power supply mode | DC |
| Number of power modules | 6 |
| Redundant power supply |
Dual-input power supply is recommended to ensure reliability. |
| Rated input voltage [V] | -48 V/-60 V |
| Input voltage range [V] | -40 V to -72 V |
| Maximum input current [A] | 58.5 A for the voltage of -40 V |
| Maximum output power [W] |
|
| Certification |
|
| Redundant fans | Fan modules work in hot standby mode. At the normal temperature range, the system can operate properly for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
| Heat dissipation mode | Heat dissipation using fans |
| Airflow direction | Front-to-back airflow |
| Availability | 0.9999971695 |
| MTBF [year] | 34.93 year |
| MTTR [hour] | 1 hour |
| Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) (When the altitude is between 1800 m and 5000 m (5906 ft. and 16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).) |
| Long-term operating relative humidity [RH] | 5% RH to 85% RH, noncondensing |
| Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) |
| Storage altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
| Storage relative humidity [RH] | 5% RH to 95% RH, noncondensing |
| Storage temperature [°C (°F)] | -40ºC to +70ºC (-40°F to +158°F) |
Chongqing Chimu Technology Co., Ltd. was established in 2011, we have been engaged in this industry 11 years. Relying on 11 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model. Let the network better connect you and me, connect the world. In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price.
We are devoted to offering Switches, Routers, Servers, Storages, LTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP. Our long-term aim is to provide users high-quality, efficient, economic, timely services. Looking forward to establish long-term and win-win business relations with you.
A)Stable and Wide Supply Chain System
we have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
B)Competitive Price
We ensure the most competitive price. Warm reminders here, telecommunications equipment configuration is quite different, the price shown on the website is only for reference. After configuration and quantity been confirmed, we will give the final most competitive discounted price.
C) Safe and Easy Payment Solutions
We accept all major credit cards, PayPal and wire transfer.
D)Fast Delivery and Shipping
Fast, professional and reliable delivery.
E)11 Years Experience
we have been engaged in this industry more than 11 years, we have rich industry experience.
Q: How about your main products?
A: Our product lines include Switches, Routers, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Q: What brand of products do you offer?
A: We can supply all the brands you need.
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,EXW,FCA;
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash etc...
Q: Can we get free samples?
A: Sorry, it is not available, but you can pay for one.
Q. How can we guarantee quality
?
A:Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: How about your delivery time?
A: Generally, it will take 1 to 10 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q: Do you test all your goods?
A: Yes, We have professional engineer to test all devices before shipping.
Q:How about the MOQ?
A:1 piece
){kind=link}