Communication Mode: | Full-Duplex & Half-Duplex |
---|---|
Type: | Network Switch |
Ports: | 16 |
Still deciding? Get samples of US$ 3900/piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Features | S7503X | S7506X-POE | S7506X-S | S7510X-POE | ||
Switching capacity* | 2.88Tbps | 5.76Tbps | 1.28Tbps | 9.6Tbps | ||
Forwarding capacity* | 2160Mpps | 4320Mpps | 960Mpps | 7200Mpps | ||
MPU* slots | 2 | 2 | 2 | |||
LPU slots | 3 | 6 | 10 | |||
MPU Name | LSQM2SUPA0 | LSQM1MPUSA0 LSQM1MPUSC0 |
LSQM1MPUS06S0 | LSQM1MPUS06S0 | LSQM1MPUS10B0 LSQM1MPUS10C0 |
|
MPU Processor | 1GHz 2 cores | 1GHz 2 cores | 1.2GHz 4 cores | 1.2GHz 4 cores | 1GHz 2 cores | |
MPU Flash /SDRAM | Flash 2GB SDRAM 2GB |
Flash 2GB SDRAM 4GB |
Flash 4GB SDRAM 4GB |
Flash 4GB SDRAM 4GB |
Flash 2GB SDRAM 4GB |
|
MPU Console Ports | 1x RJ-45 1x USB console |
1x RJ-45 1x USB console |
1x RJ-45 1x USB console |
|||
MPU MGMT Ports | 1x 10/100/1000M RJ-45 1x 1000M SFP |
2x 10/100/1000M RJ-45 2x 1000M SFP |
1x 10/100/1000M RJ-45 1x 1000M SFP |
1x 10/100/1000M RJ-45 1x 1000M SFP |
2x 10/100/1000M RJ-45 2x 1000M SFP |
|
Operating environment | Temperature: 0°C to 45°C (32°F to 113°F) Humidity: 5% to 95% (non-condensing) |
|||||
Input voltage |
100~240V AC; 50/60Hz; 16A | |||||
Maximum power consumption | 800W | 1870W | 1640W | 2850W | ||
Dimension (H x W x D) | 216mm×436mm×420mm (5U) 8.5 x 17.2 x 16.5 in |
575mm×436mm×420mm (13U) 22.6 x 17.2 x 16.5 in |
708mm×436mm×420mm (16U) 27.9 x 17.2 x 16.5 in |
|||
Fully loaded weight (kg) | < 35 kg < 77.2 lb |
< 75 kg < 165.3 lb |
< 95 kg < 209.4 lb |
|||
Availability | 99.999% | 99.999% | 99.999% | |||
MTBF(yrs) | 42.9 | 27.9 | 25.5 | |||
MTTR(hrs) | 1 | 1 | 1 |
Features |
S7503X-M-G |
S7503X-G |
S7506X-G-PoE |
S7510X-G-PoE |
Ethernet |
IEEE 802.1p (CoS priority) IEEE 802.1Q (VLAN) IEEE 802.1D (STP)/802.1w (RSTP)/802.1s (MSTP)/BPDU guard IEEE 802.1ad (QinQ), selective QinQ, VLAN mapping IEEE 802.3x (full-duplex flow control) IEEE 802.3ad (link aggregation), cross-card link aggregation RRPP Cross-card port mirroring/flow mirroring Broadcast/multicast/unknown unicast storm suppression on an interface Jumbo frame Port-based VLAN, Protocol-based VLAN, IP subnet-based VLAN, MAC-based VLAN Multicast VLAN+ Single VLAN cross connect, dual VLAN cross connect GVRP LLDP |
|||
Routing |
ARP proxy DHCP relay DHCP server Static routing RIPv1/v2 OSPFv2 IS-IS BGPv4 OSPF/IS-IS/BGP GR (Graceful Restart) ECMP load balancing Policy-based routing Routing policy ICMPv6 ICMPv6 redirection DHCPv6 ACLv6 OSPFv3 RIPng BGP4+ IS-ISv6 Manual tunneling ISATAP 6to4 tunneling Dual stack (IPv4 and IPv6) |
|||
Multicast |
IGMPv1/v2/v3 IGMPv1/v2/v3 snooping IGMP filter IGMP fast leave PIM-SM/PIM-DM/PIM-SSM MSDP Anycast RP MLDv2/MLDv2 snooping PIM-SMv6, PIM-DMv6, PIM-SSMv6 |
|||
ACL/QoS |
Basic and advanced ACLs VLAN-based ACLs Ingress/Egress ACLs Ingress/Egress CAR, at a granularity of 8 Kbps CAR Traffic shaping 802.1P/DSCP priority marking Hierarchical QoS (HQoS), three-level queue scheduling Queue scheduling algorithms: SP, WRR, SP+WRR, WFQ Congestion avoidance techniques, including tail drop and WERD Mirroring |
|||
SDN/ OpenFlow |
OpenFlow 1.3 Multi-controller (EQUAL mode, active/passive mode) Multi-flow table pipeline Group table Two-level meter |
|||
VXLAN |
VXLAN L2 switching VXLAN L3 routing VXLAN VTEP IS-IS+ENDP distributed control plane MP-BGP+EVPN distributed control plane OpenFlow+Netconf centralized control plane |
|||
MPLS/VPLS |
L3 MPLS VPN L2 VPN: VLL (Martini, Kompella) MCE MPLS OAM VPLS, VLL Hierarchy VPLS, QinQ+VPLS P/PE function LDP |
|||
Multiservice convergence |
Integrated with access controller functions without using a separate access controller module |
|||
Security |
Hierarchical user management and password protection EAD Portal authentication MAC authentication IEEE 802.1x and IEEE 802.1x SERVER AAA/Radius HWTACACS SSHv1.5/SSHv2 Basic and advanced Access Control Lists for packet filtering OSPF, RIPv2, BGPv4 pain text and MD5 authentication IP address, VLAN ID, MAC address multiple binding combination uRPF Active/standby data backup CPU DoS Protection ARP Attack Protection Microsegmentation |
|||
System management
|
IMC network management system Loading and upgrading through XModem/FTP/TFTP SNMP v1/v2/v3 sFlow, NetStream NQA (Network Quality Analysis) RMON and groups 1, 2, 3 and 9 NTP, PTP (1588v2) Fault alarm and automatic fault recovery System logs Device status monitoring mechanism, including the CPU engine, backplane, chips and other key components Intelligent power management, 802.3az EEE Online monitoring of the device and key components, including the MPUs, backplane, chips, and storage components Telemetry INQA, using the packet coloring and counting mechanism to collect device-wide and network-side packet loss statistics Built-in intelligent management module, enabling one-key deployment of device configuration and commands and intelligent version upgrade from the GUI interface eMDI |
|||
Programmability |
Using Ansible for automated configuration management and bulk configuration deployment Using Python/NETCONF/Tcl for automated network orchestration and automated DevOps |
|||
High availability |
1+1 redundancy for key components such as MPUs (MPU includes CPU + Switching Fabric) 1+1 redundancy for power modules Passive backplane Hot swapping for all components Real-time data backup on active/standby MPUs CPU protection VRRP Hot patching NSR (Nonstop Routing)/GR (Graceful Restart) for OSFP/BGP/IS-IS/RSVP Port aggregation and multi-card link aggregation BFD for VRRP/BGP/IS-IS/OSPF/RSVP/static routing, with a failover detection time less than 50 milliseconds Ethernet OAM (802.1ag and 802.3ah) MAC Tracert Hardware BFD RRPP/ERPS DLDP VCT Smart-Link ISSU (In-service Software Upgrade) +/-8 KV lightning protection |
|||
EMC |
FCC Part 15 Subpart B CLASS A ICES-003 CLASS A VCCI CLASS A CISPR 32 CLASS A EN 55032 CLASS A AS/NZS CISPR32 CLASS A CISPR 24 EN 55024 EN 61000-3-2 EN 61000-3-3 ETSI EN 300 386 |
|||
Environmental standards compliance |
RoHS REACH WEEE |
|||
Safety |
UL 60950-1 CAN/CSA C22.2 No 60950-1 IEC 60950-1 EN 60950-1 AS/NZS 60950-1 FDA 21 CFR Subchapter J GB 4943.1 |
Chongqing Chimu Technology Co., Ltd. was established in 2011, we have been engaged in this industry 11 years. Relying on 11 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model. Let the network better connect you and me, connect the world. In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price.
We are devoted to offering Switches, Routers, Servers, Storages, LTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP. Our long-term aim is to provide users high-quality, efficient, economic, timely services. Looking forward to establish long-term and win-win business relations with you.
A)Stable and Wide Supply Chain System
we have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
B)Competitive Price
We ensure the most competitive price. Warm reminders here, telecommunications equipment configuration is quite different, the price shown on the website is only for reference. After configuration and quantity been confirmed, we will give the final most competitive discounted price.
C) Safe and Easy Payment Solutions
We accept all major credit cards, PayPal and wire transfer.
D)Fast Delivery and Shipping
Fast, professional and reliable delivery.
E)11 Years Experience
we have been engaged in this industry more than 11 years, we have rich industry experience.
Q: How about your main products?
A: Our product lines include Switches, Routers, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Q: What brand of products do you offer?
A: We can supply all the brands you need.
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,EXW,FCA;
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash etc...
Q: Can we get free samples?
A: Sorry, it is not available, but you can pay for one.
Q. How can we guarantee quality?
A:Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: How about your delivery time?
A: Generally, it will take 1 to 10 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q: Do you test all your goods?
A: Yes, We have professional engineer to test all devices before shipping.
Q:How about the MOQ?
A:1 piece