| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Enterprise Switch |
| Transmission Rate: | 1000Mbps |
| Ports: | 48 |
| Weight Without Packaging [Kg(Lb)]: | 7.2kg |
| Transport Package: | Cartons |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Technical Specifications
| Other part numbers | 02353EGN (CE6866-48S8CQ-P switch (48*25G SFP28, 8*100G QSFP28, without fan and power modules)) 02353EGL (CE6866-48S8CQ-P switch (48*25G SFP28, 8*100G QSFP28, 2*AC power modules, 4*fan modules, port-side exhaust)) |
| Installation Type | Cabinet Installation |
| Depth [mm] | 420 mm |
| Wide [mm] | 442 mm |
| Height [mm] | 43.6 mm |
| Weight with packaging | 11.9 kg (26.24 lb) |
| Weight without packaging | 6.7 kg (14.8 lb) (excluding optical modules, power modules, and fan modules) |
| Maximum power consumption [W] | - 48 x 50G + 8 x 200G: 619 W (100% throughput, downlink 2 W 50G optical modules, uplink 6.5 W 200G optical modules, 40°C, dual power modules) - 48 x 25G + 8 x 100G: 544 W (100% throughput, downlink 1.5 W 25G optical modules, uplink 5 W 100G optical modules, 40°C, dual power modules) |
| Typical power consumption [W] | - 48 x 50G + 8 x 200G: 374 W (50% throughput, copper cables on all ports, normal temperature, dual power modules) - 48 x 25G + 8 x 100G: 360 W (50% throughput, copper cables on all ports, normal temperature, dual power modules), 407 W (50% throughput, short-distance optical modules on all ports, normal temperature, dual power modules) |
| Static power consumption [W] | 322 W |
| Heat dissipation mode | Air cooling |
| Maximum heat dissipation [BTU/h] | - 48 x 50G + 8 x 200G: 2110 BTU/hour (100% throughput, downlink 2 W 50G optical modules, uplink 6.5 W 200G optical modules, 40°C, dual power modules) - 48 x 25G + 8 x 100G: 1858 BTU/hour (100% throughput, downlink 1.5 W 25G optical modules, uplink 5 W 100G optical modules, 40°C, dual power modules) |
| Typical heat dissipation [BTU/h] | - 48 x 50G + 8 x 200G: 1277 BTU/hour (50% throughput, copper cables on all ports, normal temperature, dual power modules) - 48 x 25G + 8 x 100G: 1229 BTU/hour (50% throughput, copper cables on all ports, normal temperature, dual power modules), 1389 BTU/hour (50% throughput, short-distance optical modules on all ports, normal temperature, dual power modules) |
| Static heat dissipation [BTU/h] | 1100 BTU/hour |
| Power supply mode | AC,DC,HVDC |
| Rated input voltage [V] | - 600 W AC&240 V DC power module: 100 V AC to 240 V AC, 50/60 Hz; 240 V DC - 1000 W DC power module: -48 V DC to -60 V DC - 1200 W high-voltage DC power module: 240 V DC to 380 V DC |
| Input voltage range [V] | - 600 W AC&240 V DC power module: 90 V AC to 290 V AC, 45 Hz to 65 Hz; 190 V DC to 290 V DC - 1000 W DC power module: -38.4 V DC to -72 V DC - 1200 W high-voltage DC power module: 190 V DC to 400 V DC |
| Maximum input current [A] | - 600 W AC&240 V DC power module: 8 A (100 V AC to 240 V AC); 4 A (240 V DC) - 1000 W DC power module: 30 A (-48 V DC to -60 V DC) - 1200 W high-voltage DC power module: 8 A |
| Rated output power [W] | - 600 W AC&240 V DC power module: 600 W - 1000 W DC power module: 1000 W - 1200 W high-voltage DC power module: 1200 W |
| Memory | DRAM: 8 GB |
| NOR Flash | 64 MB |
| NAND Flash | 4 GB |
| USB | It can be used for log backup and USB-based deployment. This function is reserved. |
| Console port | RJ45 |
| Downlink Service interface | 48*25GE SFP28/48*50GE SFP56 1. 25GE ports can be used as 10GE ports. 50GE ports can be used as 25GE ports but not 10GE or GE ports. 2. When 25GE ports are upgraded to 50GE ports, eight ports form a group. Note: 1. Support for optical modules: (1) In the case of port-side air intake, downlink ports support 10G-AOC/SR/LR/ER/ZR and 25G-AOC/SR/LR. (2) In the case of port-side air exhaust, downlink ports support 10G-AOC/SR/LR and 25G-AOC/SR/LR. 2. Support for copper cables: If the port is a 50GE port, contact R&D engineers to verify the interconnection before interconnecting with a third-party device. |
| Uplink Service interface | 8 x 100GE QSFP28/8 x 200GE QSFP56 1. Each 100GE port can be configured as a 40GE port, and each 200GE port can be configured as a 100GE/40GE port. 2. When a 100GE port is upgraded to a 200GE port, four such ports form a group. 3. 100GE ports are divided into groups 1 to 4 and 5 to 8. Four ports in each group are split together. Ports 2, 4, 6, and 8 can be split into four 25GE ports (whose speed can be set to 10 Gbit/s). After the split, ports 1, 3, 5, and 7 cannot be used. A 100GE port cannot be split into two 50GE (50GE: 2 x 25GE) ports. 4. 200GE ports cannot be split. Note: 1. Supported optical modules: (1) In the case of port-side air intake, 100GE/200GE ports support 100G-AOC/SR4/CWDM4/LR4/4WDM optical modules. (2) In the case of port-side air exhaust, 100GE/200GE ports support 100G-AOC/SR4/CWDM4/LR4 optical modules, but do not support 50GE and 200GE optical modules. 2. Supported copper cables: In V300R020C10 and later versions, 40GE, 40GE 1-to-4 4x10GE, 100GE 1-to-4 4x25GE, and 200GE copper cables are supported. As for 200GE ports to interconnect with third-party devices, contact R&D engineers to verify the interconnection. |
| Service port supporting the stack function | Reserved function. This function is not enabled. |
| RTC | Supported |
| Switching capacity | 48x25G+8x100G:2T;48x50G+8x200G:8T |
| Redundant fans | The device supports 3+1 backup of fan modules that work in hot standby mode. If a single fan module fails, the device can work properly in a short period of time. To guarantee long-term operation of the device, you are advised to replace the failed fan module immediately. |
| Redundant power supply | 1+1 backup |
| Number of power modules | 2 |
| Power supply surge protection | - AC power supply protection: 6 kV in common mode and 6 kV in differential mode - 240 V HVDC power protection: 4 kV in common mode and 2 kV in differential mode - -48 V DC power supply protection: 4 kV in common mode and 2 kV in differential mode - 380 V HVDC power protection: 4 kV in common mode and 2 kV in differential mode |
| Types of fans | Pluggable |
| Number of fans | 4 |
| Airflow direction | port-side intake/port-side exhaust airflow |
| Storage temperature | -40°C to +70°C (-40°F to +158°F) |
| Long-term operating temperature | 0°C-40°C, 32°F-104°F (0-1800 m, 0-5905.44 ft.) Note: When the altitude is between 1800 m (5905.44 ft.) and 5000 m (16404.00 ft.), the highest operating temperature decreases by 1°C (1.8°F) every time the altitude increases by 220 m (721.78 ft.). |
| Storage relative humidity [RH] | 5% to 95% RH, non-condensing |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, noncondensing |
| Storage altitude | ≤ 5000 m (16404 ft.) |
| Long-term operating altitude | ≤ 5000 m (16404 ft.) |
| MTBF [year] | 30.32 years |
| MTTR [h] | 1.5 hours |
| Noise at high temperature (40°C, sound pressure) | Front-to-back airflow: 67.6 dB(A) on average (maximum: 73.4 dB(A)) Back-to-front airflow: 68 dB(A) on average (maximum: 75.4 dB(A)) |
| Noise at normal temperature (27°C, sound pressure) | Front-to-back airflow: 49.8 dB(A) on average (maximum: 53.6 dB(A)) Back-to-front airflow: 47.8 dB(A) on average (maximum: 51.2 dB(A)) |
| Availability | 0.9999943515 |
Chongqing Chimu Technology Co., Ltd. was established in 2011, we have been engaged in this industry 11 years. Relying on 11 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model. Let the network better connect you and me, connect the world. In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price.
We are devoted to offering Switches, Routers, Servers, Storages, LTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP. Our long-term aim is to provide users high-quality, efficient, economic, timely services. Looking forward to establish long-term and win-win business relations with you.
A)Stable and Wide Supply Chain System
we have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
B)Competitive Price
We ensure the most competitive price. Warm reminders here, telecommunications equipment configuration is quite different, the price shown on the website is only for reference. After configuration and quantity been confirmed, we will give the final most competitive discounted price.
C) Safe and Easy Payment Solutions
We accept all major credit cards, PayPal and wire transfer.
D)Fast Delivery and Shipping
Fast, professional and reliable delivery.
E)11 Years Experience
we have been engaged in this industry more than 11 years, we have rich industry experience.
Q: How about your main products?
A: Our product lines include Switches, Routers, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Q: What brand of products do you offer?
A: We can supply all the brands you need.
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,EXW,FCA;
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash etc...
Q: Can we get free samples?
A: Sorry, it is not available, but you can pay for one.
Q. How can we guarantee quality?
A:Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: How about your delivery time?
A: Generally, it will take 1 to 10 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q: Do you test all your goods?
A: Yes, We have professional engineer to test all devices before shipping.
Q:How about the MOQ?
A:1 piece
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}